FEYNLAB® TIRE AND WHEEL CLEANER
Product Benefits:
-
- FEYNLAB TIRE CLEANER utilizes smart surfactant technology to easily remove the toughest brown stains, contamination, road grime, and previously applied tire dressings to restore your tire to a factory finish
- FEYNLAB TIRE CLEANER is a high alkaline product that quickly and effectively preps tires for the FEYNLAB TIRE PRO coating application
- Body shop safe – 100% silicone free
Approved Surfaces:
APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Rubber Tires
- Will not damage clear coated rims
- Will not damage clear coated rims that have been treated with Feynlab Ceramic Wheel and Caliper
- NOT FOR USE
- As a replacement for wheel acid or other products that dissolve brake dust from rims
- On magnesium rims
- As a maintenance product for tires already treated with FEYNLAB TIRE COATING.
Included:
A 500ml bottle with sprayer.
Cautions:
- It is recommended to wear respirator & gloves during application.
Directions:
To ensure a good experience with the product, place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F) environment.
Application Instructions:
Feynlab tire cleaner is sprayed on uniformly from the bottom of the tire to the top. Allow product to dwell at least 10 seconds then begin agitating with a stiff bristle brush until you’ve properly removed all visible debris. Then rinse thoroughly with free flowing water.
In water restricted areas you can apply Feynlab tire cleaner onto the tire using a microfiber towel. If using a microfiber towel, remember to frequently rotate the towel to clean aides in order to maximize cleaning. Most of the time all contamination will be removed on the first attempt. However, for excessively dirty tires, simply repeat the process! After the Cleaning phase, wipe down all newly cleaned tire surfaces with a towel, saturated in water, to remove all product residue from the rubber.
If you desire to clean both the wheels / rims at the same time, spray uniformly from bottom to top the tires and wheels. Cleaning wheels first use a soft bristle brush to gently agitate the surface. Then proceed to clean tire with a stiff bristle brush. Follow this up by rinsing both surfaces thoroughly with free flowing water.
We all know that surface preparation is the most important step in the longevity and durability of any last step protection. Utilizing our proprietary smart surfactant technology, Feynlab Tire & Wheel Cleaner will quickly and safely remove the toughest browning stains, road grime, grease, oil, brake dust and even years of old silicon tire dressing build up, leaving behind a factory finish ready to protected by Feynlab Tire Coating or your favorite dressing.
Feynlab Tire & Wheel Cleaner contains emulsifiers and deep cleaning surfactants that loosen and remove all foreign surface particles and even penetrates deep into the pores of the rubber tires, immediately pulling out any embedded contamination and dressing buildup. It is safe to use on both coated and non-coated wheels, just avoid using on bare magnesium.
Follow up with Feynlab Tire Coating and Feynlab Wheel & Caliper for long term protection and shine.